From Corrosion Casting to Virtual Dissection: Contrast-Enhanced Vascular Imaging using Hafnium Oxide Nanocrystals.

Vascular corrosion casting is a method used to visualize the three dimensional (3D) anatomy and branching pattern of blood vessels. A polymer resin is injected in the vascular system and, after curing, the surrounding tissue is removed. The latter often deforms or even fractures the fragile cast. Here, a method is proposed that does not require corrosion, and is based on in situ micro computed tomography (micro-CT) scans. To overcome the lack of CT contrast between the polymer cast and the animals' surrounding soft tissue, hafnium oxide nanocrystals (HfO2 NCs) are introduced as CT contrast agents into the resin. The NCs dramatically improve the overall CT contrast of the cast and allow for straightforward segmentation in the CT scans. Careful design of the NC surface chemistry ensures the colloidal stability of the NCs in the casting resin. Using only 5 m% of HfO2 NCs, high-quality cardiovascular casts of both zebrafish and mice can be automatically segmented using CT imaging software. This allows to differentiate even µ $\umu$ m-scale details without having to alter the current resin injection methods. This new method of virtual dissection by visualizing casts in situ using contrast-enhanced CT imaging greatly expands the application potential of the technique.

Fascinating wonderful network: Rete mirabile of the maxillary artery in cats - minireview.

Cats are one of the most common companion animals, and they differ from dogs in several important ways. Considering the central importance of anatomy in high-quality medicine, the treatment of the feline mandible, mostly during intraoral procedures requiring general anaesthesia, has many important features. In cats, the major artery of the brain is the maxillary artery that forms unique structure - the rete mirabile. The rete mirabile is a plexus like vascular structure that lies extracranially and communicates with brain arterial circle through the orbital fissure. The development of the brain vasculature is different in cats, and it includes obliteration mechanisms of the internal carotid artery. The course of the maxillary artery that forms the rete mirabile has a strong relationship to the angular process of the mandible. Emphasis should be placed on manipulation with the feline mandible, especially during open-mouth procedures, as mistakes can lead to blindness, deafness, and central neurological disorders due to compression of the maxillary artery by the angular process of the mandible. This paper focuses on the anatomy and function of the blood supply to the brain, which is very specific in domestic cats and other felids.

Multicomponent Acrylic Formulation Design for Corrosion Casting with Controlled Mechanical Properties.

Corrosion casting based on the curing of acrylic resins enables one to create casts as replicas of body systems, enhancing our knowledge of veterinary medicine. The identification of the optimal chemical formulations as well as the processing conditions, the delivery of good control during the liquid state and the excellent macroscopic properties during solidification and after use are remaining challenges. In the present work, based on the identification of more qualitative trends, it is demonstrated that multicomponent comonomer mixtures are interesting materials that can be used to expand the range of mechanical properties and can specifically result in a better balance between stiffness and flexibility while guaranteeing dimensional stability. Emphasis is put on a large pool of formulations in the testing phase to then perform a detailed mechanical flexural analysis for the most promising cases during a more rigorous testing phase, accounting for a new pragmatic protocol for the pot life. This protocol consists of a vial-based turning test and a measurement of the viscosity variation up to 1000 mPa∙s and highlights the complex interplay between the overall initial concentrations and the impact of the absence of mixing once the system is at rest. It is demonstrated that the use of only low-molar-mass crosslinkers should be avoided, and overall, an intermediate amount of crosslinkers is recommendable.

Anatomical Characteristics of Duplicated Caudal Vena Cava in Cats-A Case Report.

Precise knowledge of the species-/breed-specific anatomy is important for accurate diagnosis and treatment. Existing literature has also been increasing in accordance with the growing demands of biomedical research, wherein mammals, including cats, have been used worldwide. Based on a vascular corrosion cast, complete duplication of the caudal vena cava (dCVC) was accidentally found in a 10-year-old male cat. The two separate symmetric veins corresponding to two caudal venae cavae cranially directed on both sides of the aorta; their first tributaries were the duplicated right and left deep circumflex iliac veins, and the median sacral vein ended in the right common iliac vein. At the L4 vertebra level, the left caudal vena cava crossed the aorta ventrally. It united with the right CVC immediately above the renal veins at the level of the cranial mesenteric artery (L2-L3). Embryologic knowledge is essential to understand the differences between the CVC variants in domestic mammals and the inferior vena cava in humans. However, views regarding the post-hepatic segment of the CVC during development vary considerably. Therefore, our case report also includes a summary of the CVC developmental theories and their clinical impact. We believe that this case and literature review contribute to the knowledge regarding the deep abdominal veins' variability, concomitant pathologies, and accurate diagnosis and surgery. Additionally, the latest robust studies demonstrating the exclusive participation of the caudal cardinal veins in the CVC development are discussed.

Can the transection plane be optimized in pancreatic resections?

Purpose: According to current protocol, the separation of pancreatic head and body is performed at the level of superior mesenteric vein (SMV). Previous data indicate that the resection plane should be modified in portal annular pancreas. We presumed that the optimal line of pancreatic resections could also be different in other cases. Our aim is to simulate pancreatic resections in different planes and find the optimal resection line with the minimum number of cut vessels. Main methods: 25 abdominal vascular corrosion casts were prepared, the aorta and the portal vein were cannulated. CT scans were taken on the casts, and specific planes were reconstructed simulating different resection lines. The total amount of cross sections of vessels were calculated in the different planes. Results: In our series, the optimal plane is the SMV in 11/25, 2 cm left in 10/25, 1 cm left in 4/25, 1 cm right in 1/25 and 2 cm right in none of our cases. The group of left sided extension contain more than half of the cases. With left sided resections, the cut surface of the vessels may be lowered to even 29% compared to the SMV plane. Conclusion: Our study revealed that pancreatic resections should be extended to the left side of the SMV in more than half of our cases. Therefore, the resection plane should be determined by preoperative imaging methods. Using DICOM viewer with multiplanar reconstruction, the resection planes can be simulated in clinical practice, which would reduce the risk of postoperative bleeding.

Non-linear shrinkage of Batson's #17 resin during vascular corrosion casting.

Many studies of cardiovascular function require a realistic representation of vascular geometry. Corrosion casting has been used to acquire such geometries for many decades. However, the fidelity with which this method reproduces vascular anatomy has not been completely determined. Here we report on the non-linear shrinkage characteristics and exothermic properties of Batson's #17, a widely used casting resin, in model systems and in aortas of rats and rabbits. The setting process was captured using high-resolution photography. Shrinkage ranged from 3.4 ± 1.5% of the diameter in 1 ml plastic syringes (inner diameter 4.8 mm) to 19.6 ± 5.6% in the aorta of rats (diameter 1.5-2.6 mm). In addition, aortic curvature and branching angles changed during setting. These effects should be determined and corrected in studies of vascular geometry where high accuracy is required.

A Method to Visualize and Quantify the Intraosseous Arteries of the Femoral Head by Vascular Corrosion Casting.

OBJECTIVE: To describe a method to display the three-dimensional distribution of intraosseous arteries in the femoral head by vascular corrosion casting. METHODS: An experimental study was done to expose the intraosseous arteries of the femoral head by a microperfusion corrosion method between January 2021 and May 2021. Specimens were 23 swine femoral heads (12 female specimens and 11 male specimens, where age of swine ranged from 8 to 12 months, and the weight was approximately 150 kg). The femoral heads were microperfused with the vascular casting resin through retinacular arteries, and the bone of the femoral head was dissolved with 50% sodium hydroxide and 10% hydrochloric acid and rinsed under the microscope until the vessel casts were completely exposed. The distribution and anastomosis of the arteries in the femoral head were observed under direct vision and microscopy. The diameter of the artery in the femoral head was measured at 0.5 cm after its entry into the bone of the femoral head with a microscale under the microscope. The number of internal arteries with diameter ≥0.05 mm was counted. The number and diameter of the main trunk of the epiphyseal arteries in the femoral head between male and female swine were compared. RESULTS: The vascular casting specimen of the swine femoral head was successfully produced by using epoxy resin as a casting agent, and the three-dimensional intraosseous vascular structures were clearly visible. The number of epiphyseal arteries in male and female swine was 8.55 ± 2.15 and 8.83 ± 2.15 (t = -0.31, p = 0.38), respectively. The diameters of the superior epiphyseal arteries in male and female swine were 0.35 ± 0.09 and 0.31 ± 0.08 mm (t = 1.03, p = 0.16), the diameters of the inferior epiphyseal arteries were 0.47 ± 0.05 and 0.49 ± 0.09 mm (t = -0.57, p = 0.29), and the diameters of the anterior epiphyseal arteries were 0.34 ± 0.08 and 0.33 ± 0.13 mm (t = 0.32, p = 0.37). There was no significant difference in the number and diameter of the main trunk of intraosseous arteries between male and female swine (p > 0.05). The main trunk of intraosseous arteries formed an anastomosis in the center of the femoral head. Among 23 swine femoral head samples, three types of intraosseous anastomosis were observed, including 13 (57%) posterior superior-posterior inferior, seven (30%) posterior inferior-anterior, and three (13%) uniform intraosseous anastomosis. CONCLUSION: The microperfusion corrosion method can produce the vascular casting specimen of swine femoral head revealing the three-dimensional structure of the intraosseous artery, which clearly shows the origin, course and branches, and diameter, as well as the anastomosis, of nutrient arteries in the femoral head. This method provides a simple and rapid technique for quantifying and visualizing intraosseous arteries.

Combining Chromatographic, Rheological, and Mechanical Analysis to Study the Manufacturing Potential of Acrylic Blends into Polyacrylic Casts.

Polyacrylics have been considered for a broad range of material applications, including coatings, dental applications, and adhesives. In this experimental study, the casting potential of a group of (co)monomers belonging to the acrylic family has been explored to enable a more sustainable use of these polymer materials in the medical and veterinary science field. The individual contributions of each comonomer have been analyzed, the reaction conversion has been studied via gas chromatography (GC), the rheological behavior has been characterized via stress-controlled measurements, and the final mechanical properties have been obtained from tensile, flexure, and impact tests. The GC results allow assessing the pot life and thus the working window of the casting process. For the rheological measurements, which start from low-viscous mixtures, a novel protocol has been introduced to obtain accurate absolute data. The rheological data reflect the time dependencies of the GC data but facilitate a more direct link with the macroscopic material data. Specifically, the steep increase in the viscosity with increasing reaction time for the methyl methacrylate (MMA)/ethylene glycol dimethyl methacrylate (EGDMA) case (2% crosslinker) allows maximizing several mechanical properties: the tensile/flexure modulus, the tensile/flexure stress at break, and the impact strength. This opens the pathway to more dedicated chemistry design for corrosion casting and polyacrylic material design in general.

Estimating Arterial Cyclic Strain from the Spacing of Endothelial Nuclei.

BACKGROUND: The non-uniform distribution of atherosclerosis within the arterial system is widely attributed to variation in haemodynamic wall shear stress. It may also depend on variation in pressure-induced stresses and strains within the arterial wall; these have been less widely investigated, at least in part because of a lack of suitable techniques. OBJECTIVES: Here we show that local arterial strain can be determined from impressions left by endothelial cells on the surface of vascular corrosion casts made at different pressures, even though only one pressure can be examined in each vessel. The pattern of pits in the cast caused by protruding endothelial nuclei was subject to "retro-deformation" to identify the pattern that would have occurred in the absence of applied stresses. METHODS: Retaining the nearest-neighbour pairs found under this condition, changes in nearest-neighbour vectors were calculated for the pattern seen in the cast, and the ratio of mean changes at different pressures determined. This approach removes errors in simple nearest-neighbour analyses caused by the nearest neighbour changing as deformation occurs. RESULTS: The accuracy, precision and robustness of the approach were validated using simulations. The method was implemented using confocal microscopy of casts of the rabbit aorta made at systolic and diastolic pressures; results agreed well with the ratio of the macroscopic dimensions of the casts. CONCLUSIONS: Applying the new technique to areas around arterial branches could support or refute the hypothesis that the development of atherosclerosis is influenced by mural strain, and the method may be applicable to other tissues.

Analysis of spinal cord blood supply combining vascular corrosion casting and fluorescence microsphere technique: A feasibility study in an aortic surgical large animal model.

INTRODUCTION: Spinal cord ischemia after cardiovascular interventions continues to be a devastating problem in modern surgery. The role of intraspinal vascular networks and anterior radiculomedullary arteries (ARMA) in preventing spinal cord ischemia is poorly understood. MATERIALS AND METHODS: Landrace pigs (n = 30, 35.1 ± 3.9 kg) underwent a lateral thoracotomy. Fluorescent microspheres were injected into the left atrium and a reference sample was aspirated from the descending aorta. Repeated measurements of spinal cord and renal cortical blood flow from the left and right kidneys with three different microsphere colors in five pigs were taken to validate reproducibility. Spinal cord blood flow to the upper thoracic (T1-T4), mid-thoracic (T5-T8), lower thoracic (T9-T13), and lumbar (L1-L3) levels were determined. After euthanasia, we carried out selective vascular corrosion cast and counted the left and right ARMAs from levels T1-T13. RESULTS: Blood flow analysis of the left and right kidneys revealed a strong correlation (r = .94, p < .001). We detected more left than right ARMAs, with the highest prevalence at T4 (p < .05). The mean number of ARMAs was 8 ± 2. Their number in the upper thoracic region ranged from 2 to 7 (mean of 5 ± 1), while in the lower thoracic region they ranged from 0 to 5 (mean of 3 ± 1 [p < .001]). CONCLUSIONS: This study shows that combining fluorescence microsphere technique and vascular corrosion cast is well suited for assessing the blood flow and visualizing the arteries at the same time.

Reprint of Corrosion casting of the temporal bone: Review of the technique.

The temporal bone has the most sophisticated anatomy of the whole skeleton. Its study is a challenge for students and surgeons. An inverse model of the visually obscured cavities and canals can facilitate better three-dimensional orientation and investigation. This can be made by means of corrosion casting, which is an established technique first documented on the temporal bone at the beginning of the nineteenth century. The prepared specimens are suitable not only for teaching purposes but also for research on the fascinating topography of the osseous labyrinth and the whole temporal bone. Many important studies on temporal bone anatomy are based on this technique. An extensive review of the pertinent literature is provided in relation to each method available.

Corrosion casting of the cardiovascular structure in adult zebrafish for analysis by scanning electron microscopy and X-ray microtomography.

Zebrafish have come to the forefront as a flexible, relevant animal model to study human disease, including cardiovascular disorders. Zebrafish are optically transparent during early developmental stages, enabling unparalleled imaging modalities to examine cardiovascular structure and function in vivo and ex vivo. At later stages, however, the options for systematic cardiovascular phenotyping are more limited. To visualise the complete vascular tree of adult zebrafish, we have optimised a vascular corrosion casting method. We present several improvements to the technique leading to increased reproducibility and accuracy. We designed a customised support system and used a combination of the commercially available Mercox II methyl methacrylate with the Batson's catalyst for optimal vascular corrosion casting of zebrafish. We also highlight different imaging approaches, with a focus on scanning electron microscopy (SEM) and X-ray microtomography (micro-CT) to obtain highly detailed, faithful three-dimensional reconstructed images of the zebrafish cardiovascular structure. This procedure can be of great value to a wide range of research lines related to cardiovascular biology in small specimens.

Corrosion casting of the temporal bone: Review of the technique.

The temporal bone has the most sophisticated anatomy of the whole skeleton. Its study is a challenge for students and surgeons. An inverse model of the visually obscured cavities and canals can facilitate better three-dimensional orientation and investigation. This can be made by means of corrosion casting, which is an established technique first documented on the temporal bone at the beginning of the nineteenth century. The prepared specimens are suitable not only for teaching purposes but also for research on the fascinating topography of the osseous labyrinth and the whole temporal bone. Many important studies on temporal bone anatomy are based on this technique. An extensive review of the pertinent literature is provided in relation to each method available.

Four left renal arteries - a rare variant of kidney arterial supply.

We describe the arterial supply of a human kidney harvested post-mortem from a 75-year-old female volunteer body donor. The kidney was analysed with con- trast-enhanced computed tomography (CT), and corrosion casting was used to reveal the kidney's angio-architecture. In the left kidney, we observed four renal arteries, each originating directly from the abdominal aorta. Three renal arteries, including the main renal artery, coursed through the renal hilum, and the fourth renal artery reached the lower kidney pole. The supply areas of each of the four renal arteries were analysed with a three-dimensional reconstruction of CT images and with corrosion casting. There were no clear boundaries between the areas supplied by the four renal arteries because their branches overlapped in most kidney segments.

9.4T Magnetic Resonance Imaging of the Mouse Circle of Willis Enables Serial Characterization of Flow-Induced Vascular Remodeling by Computational Fluid Dynamics.

BACKGROUND: The neurovasculature dynamically responds to changes in cerebral blood flow by vascular remodeling processes. Serial imaging studies in mouse models could help characterize pathologic and physiologic flow-induced remodeling of the Circle of Willis (CoW). METHOD: We induced flow-driven pathologic cerebral vascular remodeling in the CoW of mice (n=3) by ligation of the left Common Carotid Artery (CCA), and the right external carotid and pterygopalatine arteries, increasing blood flow through the basilar and the right internal carotid arteries. One additional mouse was used as a wild-type control. Magnetic Resonance Imaging (MRI) at 9.4 Tesla (T) was used to serially image the mouse CoW over three months, and to obtain threedimensional images for use in Computational Fluid Dynamic (CFD) simulations. Terminal vascular corrosion casting and scanning electron microscope imaging were used to identify regions of macroscopic and microscopic arterial damage. RESULTS: We demonstrated the feasibility of detecting and serially measuring pathologic cerebral vascular changes in the mouse CoW, specifically in the anterior vasculature. These changes were characterized by bulging and increased vessel tortuosity on the anterior cerebral artery and aneurysm- like remodeling at the right olfactory artery origin. The resolution of the 9.4T system further allowed us to perform CFD simulations in the anterior CoW, which showed a correlation between elevated wall shear stress and pathological vascular changes. CONCLUSION: In the future, serial high-resolution MRI could be useful for characterizing the flow environments corresponding to other pathologic remodeling processes in the mouse CoW, such as aneurysm formation, subarachnoid hemorrhage, and ischemia.

Arterial and microvascular supply of cerebral hemispheres in the nude mouse revealed using corrosion casting and scanning electron microscopy.

Morphological analyses of cerebral vascularization are not only important for the characterization of the anatomical and physiological relationships between vascular and nervous tissue, but also required to understand structural modifications that occur in many pathological conditions affecting the brain. The aim of this study was to generate a three-dimensional vascular map of the cerebral hemispheres in the nude mouse brain, a widely used animal model for studying tumour biology. We used the corrosion casting (CC) technique to isolate blood vessels from 30 nude mouse brains. All casts were analysed using scanning electron microscopy (SEM), which generated quantitative data regarding vessel length and diameter as well as inter-vascular and inter-branching distances. We identified three different topographical regions: (i) the cortical region, characterized by a superficial wide sheet of vessels giving rise to terminal perforant vessels that penetrate the grey matter; (ii) the inner part of the grey matter, in which dense capillary nets form many flake-like structures extending towards the grey-white matter boundary, where perforant vessels finally change direction and form a well-defined vascular sheet; and (iii) the white matter layer, characterized by a more disorganized vascular architecture. In this study, we demonstrate the accuracy of the CC-SEM method in revealing the 3D-topographical organization of the vascular network of the normal nude mouse brain. These baseline data will serve as a reference for future anatomical investigations of pathological alterations, such as tumour infiltrations, using the nude mouse model.

A guide for effective anatomical vascularization studies: useful ex vivo methods for both CT and MRI imaging before dissection.

The objective of this study was to develop a simple and useful injection protocol for imaging cadaveric vascularization and dissection. Mixtures of contrast agent and cast product should provide adequate contrast for two types of ex vivo imaging (MRI and CT) and should harden to allow gross dissection of the injected structures. We tested the most popular contrast agents and cast products, and selected the optimal mixture composition based on their availability and ease of use. All mixtures were first tested in vitro to adjust dilution parameters of each contrast agent and to fine-tune MR imaging acquisition sequences. Mixtures were then injected in 24 pig livers and one human pancreas for MR and computed tomography (CT) imaging before anatomical dissection. Colorized latex, gadobutrol and barite mixture met the above objective. Mixtures composed of copper sulfate (CuSO4 ) gadoxetic acid (for MRI) and iodine (for CT) gave an inhomogeneous signal or extravasation of the contrast agent. Agar did not harden sufficiently for gross dissection but appears useful for CT and magnetic resonance imaging (MRI) studies without dissection. Silicone was very hard to inject but achieved the goals of the study. Resin is particularly difficult to use but could replace latex as an alternative for corrosion instead of dissection. This injection protocol allows CT and MRI images to be obtained of cadaveric vascularization and anatomical casts in the same anatomic specimen. Post-imaging processing software allow easy 3D reconstruction of complex anatomical structures using this technique. Applications are numerous, e.g. surgical training, teaching methods, postmortem anatomic studies, pathologic studies, and forensic diagnoses.

Quantitative analysis of hepatic macro- and microvascular alterations during cirrhogenesis in the rat.

Cirrhosis represents the end-stage of any persistent chronically active liver disease. It is characterized by the complete replacement of normal liver tissue by fibrosis, regenerative nodules, and complete fibrotic vascularized septa. The resulting angioarchitectural distortion contributes to an increasing intrahepatic vascular resistance, impeding liver perfusion and leading to portal hypertension. To date, knowledge on the dynamically evolving pathological changes of the hepatic vasculature during cirrhogenesis remains limited. More specifically, detailed anatomical data on the vascular adaptations during disease development is lacking. To address this need, we studied the 3D architecture of the hepatic vasculature during induction of cirrhogenesis in a rat model. Cirrhosis was chemically induced with thioacetamide (TAA). At predefined time points, the hepatic vasculature was fixed and visualized using a combination of vascular corrosion casting and deep tissue microscopy. Three-dimensional reconstruction and data-fitting enabled cirrhogenic features to extracted at multiple scales, portraying the impact of cirrhosis on the hepatic vasculature. At the macrolevel, we noticed that regenerative nodules severely compressed pliant venous vessels from 12 weeks of TAA intoxication onwards. Especially hepatic veins were highly affected by this compression, with collapsed vessel segments severely reducing perfusion capabilities. At the microlevel, we discovered zone-specific sinusoidal degeneration, with sinusoids located near the surface being more affected than those in the middle of a liver lobe. Our data shed light on and quantify the evolving angioarchitecture during cirrhogenesis. These findings may prove helpful for future targeted invasive interventions.

Measurements between the hepatic veins and portal venous system, in human cirrhotic liver: a cast study.

PURPOSE: To measure the distance between the right and middle hepatic veins and portal vein branches, in human cirrhotic liver casts. Was this measure actually smaller in the cirrhotic liver than in normal one? MATERIALS AND METHODS: This study was authorized by an area Research Ethics Committee, and each study subject or legal representative granted signed informed consent. Acrylic corrosion casts of 21 resected cirrhotic livers were generated. Diameters of hepatic veins and portal branches and pertinent intervening distances were measured. To assess differences in estimated average (relative to reference values), Student's t test for one sample was applied. RESULTS: Mean distances from right hepatic vein to the right portal branch and to portal vein bifurcation were 33 ± 6.4 and 36 ± 7.4 mm, respectively, both significantly less than published reference values in healthy human livers (p < 0.0001 and p < 0.0002, respectively). Mean distances from middle hepatic vein to right and left branches of portal vein were 36 ± 6.8 and 26 ± 8.8 mm, respectively. CONCLUSION: Distances separating right hepatic vein and portal vein (right branch and bifurcation) are diminished in cirrhotic livers compared to healthy ones. Given its caliber and proximity to portal branches, the middle hepatic vein remains as a reasonable alternative for TIPS procedures.

Structural and functional evidence for the scaffolding effect of alveolar blood vessels.

A contribution of pulmonary blood distension to alveolar opening was first proposed more than 100 years ago. To investigate the contribution of blood distension to lung mechanics, we studied control mice (normal perfusion), mice after exsanguination (absent perfusion) and mice after varying degrees of parenchymal resection (supra-normal perfusion). On inflation, mean tracheal pressures were higher in the bloodless mouse (4.0 ± 2.5 cm H2O); however, there was minimal difference between conditions on deflation (0.7 ± 0.9 cm H2O). To separate the peripheral and central mechanical effects of blood volume, multi-frequency lung impedance data was fitted to the constant-phase model. The presence or absence of blood had no effect on central airway resistance (p > .05). In contrast, measures of tissue damping (G), tissue elastance (H) and hysteresivity (η) demonstrated a significant increase in bloodless mice relative to control mice (p < .001). After varying amount of surgical resection and associated supra-normal perfusion of the remaining lung, there was an increase in G and H. Although the absolute difference in G and H increased with the amount of parenchymal resection, the proportional contribution of blood was identical in all conditions. The presence of blood in the pulmonary vasculature resulted in a constant 64 ± 5% reduction in tissue damping (G) and a 55 ± 4% reduction in tissue elastance (H). This nearly-constant contribution of blood to lung hysteresivity was only reduced by positive end-expiratory pressure (PEEP). To identify a distinct structural subset of vessels in the lung potentially contributing to these observations, vascular casting and scanning electron microscopy of the lung demonstrated morphologically distinct vascular rings at the alveolar opening. Our results suggest that intravascular blood distension, likely attributable to a subset of vessels in the alveolar entrance ring, contributes a measurable scaffolding effect to the functional recruitment of the peripheral lung.